EAGLE 415 FC
EAGLE 415 FC PDF
EAGLE 415 FC
EAGLE 415 FC PDF

EAGLE 415 FC

$117.87 CAD Sale Save
Diameter 1/8"
Size 250g
The EAGLE 415 FC has an active flux inside the rod. It can be applied in all positions with an oxy-acetylene gas torch.

For repair of tanks, engine blocks, fabrication of aluminum including cast aluminum.

Use a slightly carburizing flame. Clean all oxides from the weld area with a stainless steel wire brush. Pre-heat material to 1000°F. Melt a 1/4" of the rod on to the work piece. The flux will turn to a liquid and continue heating until the alloy free flows. Continue adding alloy until the weldment has been completed. Allow weld to cool slowly and remove flux with a stiff brush and hot water.

The EAGLE 415 FC has an active flux inside the rod. It can be applied in all positions with an oxy-acetylene gas torch.

Tensile Strength: Approx. 34,000 psi

Elongation: Approx. 15 - 20%

Working Temp: 1100° F / 593° C

Colour Match: Good

Corrosion Resistance: Good

Slightly Carurizing Flame
Sizes: Inches 1/8
mm 3.25

Catalog

 
EAGLE 414 Super | Universal Aluminum Arc Electrode
 
Eagle 188 Gouging bundle
 
The Eagle 823 XS Is A MOISTURE RESISTANT All Position Controlled Low Hydrogen Electrode For Welding Steels Sensitive To Cracking
 
EAGLE GOUGING CARBONS | Eagle Premium Gouging Carbons Are Designed For Cutting And Gouging Metals With The Use Of An Air Supply.
 
EAGLE 866 ULTRA CHROME High Strength Alloy For Dissimilar Metals